Arriving Traffic Radar – Descend Always check the ATIS and report the current letter to the Arrival Controller during your initial call. In the ATIS you will find the active landing runway and the approach type you can expect. During the initial descend Bremen Radar will assign the appropriate STARs or Transitions. At the IAF ROBEG, NIE, CEL or SAS (DLE) you might get cleared for a transition to final depending on the traffic situation. The transitions are designed as open downwind transitions , so expect vectors to the final!  Designator P is used for runway 27L / 27R while Designator R is used for runway 09R / 09L Holdings Depending on the runway in use, you can expect the following holdings if they are required. You can find all holdings at the arrival chart as well! Waypoint Course and turns Runway ROBEG 007° right turns 09L / 09R SAS Sarstedt 088° left turns 27L / 27R CEL Celle 257° right turns 27L / 27R NIE Nienburg 181° right turns 09L / 09R Continuous Descent Operation (CDO) Out of the following waypoints, CDO arrivals are available: ESTAD, OBATU, HLZ, KUGAV, WRB, TOLTA . Each runway has it's own designator for the arrival. Report if you are unable to comply with the restriction on the procedure. Runway RWY 27L RWY 27R RWY 09R RWY 09L STAR Designator D L E A The procedure is assigned by ATC only! You are only allowed to fly it as CDO if you are cleared for " transition and profile ". Arrival – Approach When contacting Hannover Director report your Callsign only! In periods of low traffic, expect shortcuts to one of the DVxxx Waypoints or radar vectors. Be prepared! Tower – Landing Expedite vacating the runway. Contact the ground/apron controller only when instructed to do so! During taxi the controller might tell you to hold short of certain taxiways or give way to other aircrafts. To not cause any conflicts it is very important to follow the instructions correctly or to ask if you are unsure what to do!