Euroscope Setup

Connection

Master connection is only required for A-CDM Airports (EDDB, EDDH, EDDV and EDDW). Non-A-CDM airports don't need a master connection.

At A-CDM airports (EDDB, EDDH), the controller responsible for IFR clearances shall connect to the CDM server as master by clicking on the respective ICAO code in the connection menu. Note: Only one Master is allowed at a time.

Not connected as Master

Establishing connection

Connected as Master

Someone else is the Master

Start-Up List

List Item	Description	Left-Click Function	Right-Click Function
BY	TOBT filed either by the Pilot via VDGS or set by ATC
TOBT	Target Off-Block Time	Ready TOBT (set TOBT "now")	TOBT Options
TSAT	Target Start-Up Time		Options
TSAC	Target Start-Up Time communicated to the pilot to monitor changes to the TSAT	Add TSAT to TSAC
CTOT	Calculated Takeoff Time	CTOT Options	Get Flow Message as text

The following list items can be toggled by clicking on the "F" on the left top of the Departure List.

List Item	Description	Left-Click Function	Right-Click Function
EOBT	Estimated Off-Block Time	Edit EOBT	Set EOBT to TOBT
DICE	Selected Remote De-Icing Position	De-Icing Options
ASRT	Actual Start-Up Request Time (time the pilot called ready)	Toggle ASRT
TTOT	Target Takeoff Time
NS	Network Status (ATFCM connection)	Network Status Options

Departure List

List Item	Description	Left-Click Function	Right-Click Function
TOBT	TOBT at A-CDM airport or EOBT at non-A-CDM airports	Ready TOBT (set TOBT "now")	EOBT/TOBT Options
TSAT	Target Start-Up Time	Toggle Start-Up Ready	Network Status Options
CTOT	Calculated Takeoff Time	CTOT Options	Get Flow Message as text

Colours

EOBT	Flight Plan suspended
TOBT	TOBT earlier than EOBT -5	TOBT after EOBT -5	Last minute of TOBT
TSAT	TSAT earlier than -5	TSAT -5 to +5	TSAT +5 to +6
TSAC	Change of TSAT by less than 5 minutes	Change of TSAT by more than 5 minutes
DICE	Remote De-Icing Stand selected
CTOT	CTOT due to ATFCM	Event/Manual CTOT	CTOT due to Flow/CAD