ATIS Codes
Default ATISmaker URL
http://uniatis.net/atis.php?metar=$metar($atisairport)&arr=$arrrwy($atisairport)&dep=$deprwy($atisairport)&apptype=ILS&info=$atiscode
General ATIS Codes
Add the following code at the end of the ATISmakerURL to include the ATIS broadcast message. For all airports except Frankfurt the departure frequency has to be included in the ATIS!
CODE |
Broadcast |
&depfreq=123.123 |
ATTENTION! DEPARTURE FREQUENCY FOR ALL DEPARTING AIRCRAFT IS 123.123 |
&lvp |
LOW VISIBILITY PROCEDURES IN OPERATION CAT II AND III AVAILABLE |
>o |
LOW VISIBILITY PROCEDURES IN OPERATION CAT III AND GUIDED TAKE-OFF AVAILABLE FOR RUNWAY %deprwy% |
EDDF ATIS Codes
Manual Codes
CODE |
Broadcast |
&ilsz25ilsz |
EXPECTreplaces ILS APPROACHY RUNWAY 25L ORwith ILS Z APPROACH RUNWAY 25R
|
&ilsz07 |
EXPECT ILS APPROACH RUNWAY 07R OR ILS Z APPROACH RUNWAY 07L |
&indep25indep |
EXPECT INDEPENDENT PARALLEL ILS APPROACH RUNWAY 25L AND ILS Y APPROACH RUNWAY 25R[...]
|
&indep07alternate |
EXPECT INDEPENDENT PARALLEL ILS APPROACH RUNWAY 07R AND ILS Y APPROACH RUNWAY 07L[...]
|
&indepz25rnpy |
EXPECT INDEPENDENTRNP PARALLELY ILSAPCH APPROACHRWY RUNWAY 25L AND ILS Z APPROACH RUNWAY 25R[...]
|
&indepz07tailwind18 |
EXPECTTAILWIND INDEPENDENTCOMPONENT PARALLELRWY ILS18 APPROACHMORE RUNWAYTHAN 07R10 ANDKT ILSPILOTS ZUNABLE APPROACHTO RUNWAYACCEPT 07LSHALL ADVISE ATC UPON START-UP REQUEST |
&night |
supresses 18 not available message
|
&tailwind18 |
TAILWIND COMPONENT RUNWAY 18 MORE THAN 10 KNOTS PILOTS UNABLE TO ACCEPT SHALL ADVISE ATC UPON START-UP REQUEST |
&rnpreqsouthonly |
RNPALL YDEPARTING APPROACHACFT ONVIA REQUESTMARUN, OBOKA AND TOBAK EXPECT SID WITH DESIGNATOR MIKE OR WHISKEY |
&rnpnabirds |
RNPCAUTION YFLOCK APPROACHOF NOTBIRDS AVAILABLEIN VICINITY OF THE AERODROME |
&windshearall |
WINDSHEAR ALL RUNWAYS |
&windshear18 |
WINDSHEAR RUNWAY 18 |
&windshear07 |
WINDSHEAR RUNWAY 07L 07C AND 07R |
&windshear25 |
WINDSHEAR RUNWAY 25L 25C AND 25R |
Automatic Setup
Note: for RNP Y change "apptype" of the URL from "ILS" to "RNP Y".