Skip to main content

Arriving Traffic

We ask all pilots to also read the General section with information relevant to all pilots.

Arrival

STAR assignment

You can usually expect not to fly out your STAR and instead to get radar vectors. However, you should be prepared to fly the STAR followed by a standard approach via the Paderborn/Lippstadt NDB (PAD).

Descent planning

To avoid having to fly unnecessarily long finals, pilots should plan to cross the following waypoints at the following altitudes. Remember that all altitude changes require an explicit clearance by ATC.

  • ARPEG: FL110
  • BAMSU: FL160
  • EXOBA: FL70
  • PADBA: FL130
  • SODNA: FL110

Approach

Approach procedures

The approach into Paderborn/Lippstadt will usually be an ILS approach.

Speeds

Pilots should plan the following speeds. Keep in mind that ATC instructions always take precedent.

  • Descent phase: 250 - 300 KIAS
  • Base: 220 KIAS
  • Turn to final: 180 - 200 KIAS

There is a restriction for maximum 250 KIAS below FL100 as the Paderborn/Lippstadt TMA is class E (with a TMZ below FL60).

You need to follow all speed instructions precisely until they are cancelled by ATC to ensure separation. If you need to slow down earlier for any reason, advise ATC immediately, so they can issue an appropriate instruction.

Taxi

While Paderborn/Lippstadt's layout is relatively simple, it is still important to conduct a thorough briefing of expected taxi routes as well as correct taxiing. To avoid delays for yourself and other users, start taxiing as soon as possible after receiving your taxi clearance.

If you are unsure about your taxi instructions, hold position and inform ATC immediately.

Back to top